Do you have any genoa track cars, for 22mm track (it’s about .85 inches, I believe old harken track). Thanks

John Burnap | John@burnap.com | 401.741.2081

Catalyst and Thinker-Upper-Of-Stuff

https://www.linkedin.com/in/johnburnap

Richard,

im sorry to hear about your ensign. I would be interested in the boom provided that it had an internal outhaul system

thank you

Mauricio

#1751

Hi Richard, you don't happen to have a #2 Genoa, do you? - I'm also on the hunt for an adjustable backstay and a couple of lower bolts for the turnbuckles as a couple of mine have bent somehow.

Lindsey B.

970.820.0484

Elysium

Thank you, here is a pic of the actual part that broke.

I would be interested in the complete traveler system and possible winches.

thanks

Stu Craig

860-918-1158

goombaysma@aol.com 

Hello Richard,

So sorry to hear.

The fittings on our rudder post/tiller just cracked/crumbled. Do you have the tiller hardware available and would you be interested in selling it? Any help would be greatly appreciated!

Hi Richard,

I'm sorry to hear about your boat. It's a big loss.

We would be interested in any smaller fittings you might have. We are looking for a bow chock which on our Ensign appears to be the same size as the chock pair at the stern. Also interested in any Harken blocks you may be selling; or anything from the main or jib sheets, the traveller system, etc.

Symantha #236

508-397-8316

I'd be interested in the forward lower shroud if it's available.

Thanks,

Chance

Vesper #403

Good morning,

Sorry to hear about your Ensign. My name is Jeff Ragains and I recently purchased Mike Barr's #1451 also out of Harbor Springs.

I am also interested in sails, the mains especially. I am actually in Harbor Springs tomorrow picking the boat up at Irish if we can put something together.

Thank you,

Jeff

Hi Richard – Sorry to hear about your boat. Id be interested in any furling jib you may have.

Mitch Kayden

845-709-5607

mtkayden@gmail.com

Sorry for your tragic loss.

I reside in the Harbor Springs area and am interested in in what may be salvaged that could be useful for #100.

In particular, the genoa and related rigging.

Allen Talcott

at@sturgeonsurf.com

Hi Richard,

Sorry to hear about your Ensign.

I’m looking for a boom vang. I am also looking to replace my traveler car for the main sheet. 

Following up. I found a boom vang. still looking for a traveller car, and may also be interested in your high clew jib. Is it hanks or furler? I have a a harken furler.

Jim Cain 

S/V Cerulean

#1633

Sent from my iPhone

617 276 5708

jamesmcain3@gmail.com

I'm interested in the main and possibly more. I'm not sure if this will post on the forum or will send you an email directly, but I have included my contact information below:

Josh Caselli

josh.caselli@gmail.com

585-406-7684

I have disposing of my Ensign #1491.

It was unfortunately "totaled" when an unmanned powerboat rammed into its side in Harbor Springs Michigan.

I have several used sails available.

A main sail that has only been used for one season - $1,150 when originally purchased in 2021

A high clew jib - $600 when originally purchased in 2021

I'm willing to take best offer for the sails.

Additionally I have an older main, Genoa, jib and spinnaker for sail.

Finally, I have plenty of used parts from the boat that are available.